「UTS Video.dll」修訂間的差異

出自ITTS
跳至導覽 跳至搜尋
行 18： 行 18：
 
=== Process procedure ===
 
=== Process procedure ===
 
* 設定 IMAGE_SOURCE (Webcam or image) , 設定 webcam.  
 
* 設定 IMAGE_SOURCE (Webcam or image) , 設定 webcam.  
−
** [[檔案:Webcam cmd1.png|縮圖]]
+
** web cam command index 如右圖 [[檔案:Webcam cmd1.png|縮圖]]
  
 
* 給予 區域 (想要分析 的 區域 可以是多組的)
 
* 給予 區域 (想要分析 的 區域 可以是多組的)
−
** [[檔案:Webcam CreateCriteria.png|縮圖]]
+
** 如右圖設定6個區域 [[檔案:Webcam CreateCriteria.png|縮圖]]
  
 
* optional:  cal_match_region (offset 校正)
 
* optional:  cal_match_region (offset 校正)

於 2020年8月6日 (四) 11:18 的修訂

UTS_Video.dll

description

  • test image color./ test led color.
    • average color which meet limit. (Cal_Avg_Color)
    • maximum Gray value / minimum Gray value.
      • cal --> Get_Result -->Show_Result
    • 符合limit 的 pixels 數量 (Cal_Pixels)
    • multiple block to analysis.
  • alignment function to adjust position (offset position)
    • 給一個目標的區域亮點(Cal_Match_Region) 讓他搜尋 找到後 回報x,y 座標. 找不到就回 -1,-1
  • image resource:
    • webcam (usb cam)
    • picture (bmp format file)

file contents

  • UTS_Video_dlg.exe
  • UTS_Video.dll

Process procedure

  • 設定 IMAGE_SOURCE (Webcam or image) , 設定 webcam.
    • web cam command index 如右圖
      Webcam cmd1.png
  • 給予 區域 (想要分析 的 區域 可以是多組的)
    • 如右圖設定6個區域
      Webcam CreateCriteria.png
  • optional: cal_match_region (offset 校正)
  • 要求開始分析
  • 判斷結果

remark

判斷主動式發光源 (LED) 曝光時間 亮度都要調整. 以避免過曝

example

Description here (copy scrip contents phase to scrip editor)
Description here (copy scrip contents phase to scrip editor)
Description here (copy scrip contents phase to scrip editor)
Description here (copy scrip contents phase to scrip editor)
Brio WebCam setting 參考右圖的指令號碼 (copy scrip contents phase to scrip editor) 
    <Item> 
      <Text> Brio camera setting</Text> 
      <Description> </Description> 
      <ItemType> 1</ItemType> 
      <Skip> 1</Skip> 
      <SubItem> 
         <Item> 
           <Text> </Text> 
           <Description> Zoom 100-500  auto</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>23</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>100</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>1</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> Zoom 100-500 200</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>23</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>200</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> Zoom 100-500 500</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>23</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>500</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 24 exposure -11 ~  auto</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>24</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content></Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>1</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 24 exposure -11 ~  -11</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>24</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>-11</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 24 exposure -11 ~  -5</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>24</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>-5</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 24 exposure -11 ~  -2</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>24</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>-2</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 26 focus macro 0~255 auto</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>26</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content></Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>1</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 26 focus macro 0~255 0</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>26</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>0</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 26 focus macro 0~255 255</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>26</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>255</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 0_brightness 0~255 0</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>0</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>0</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 0_brightness 0~255 128</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>0</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>128</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 0_brightness 0~255 255</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>0</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>255</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 1_Contrast0~255 0</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>1</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>0</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 1_Contrast0~255 128</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>1</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>128</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 1_Contrast0~255  20 255</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>1</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>255</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 3_Saturation 0~255 0</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>3</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>0</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 3_Saturation 0~255 128</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>3</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>128</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 3_Saturation 0~255 255</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>3</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>255</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 4_sharpness 0-255 0</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>4</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>0</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 4_sharpness 0-255 128</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>4</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>128</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 4_sharpness 0-255 255</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>4</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>255</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 7_WhiteBalance 2000-7500 auto</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>7</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content></Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>1</Content>
               <Description>auto1 manual2</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 7_WhiteBalance 2000-7500 2000</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>7</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>2000</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 7_WhiteBalance 2000-7500 5260</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>7</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>5260</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 7_WhiteBalance 2000-7500 7500</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>7</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>7500</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 9_gain 0-255 0</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>9</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>0</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> 9_gain 0-255 0</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> CameraName</FieldName> 
           <FieldNumber> 12</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Camera</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>SetProperty</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>index</Description>
             </i5>
             <i6>
               <Content>9</Content>
               <Description>cmd</Description>
             </i6>
             <i7>
               <Content>255</Content>
               <Description>value</Description>
             </i7>
             <i8>
               <Content>2</Content>
               <Description>manual</Description>
             </i8>
           </Parameter> 
         </Item> 
      </SubItem> 
    </Item>
cal_match_region (offset 校正 search left up white dot搜尋左上角的白點位置) (copy scrip contents phase to scrip editor) 
    <Item> 
      <Text> set offset</Text> 
      <Description> </Description> 
      <ItemType> 1</ItemType> 
      <Skip> 1</Skip> 
      <SubItem> 
         <Item> 
           <Text> </Text> 
           <Description> expect  white point pos: 41,43</Description> 
           <ItemType> 3</ItemType> 
           <Skip> 1</Skip> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> Cal_Match_Region</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> pos_x_offset;Pos_Y_offset</FieldName> 
           <FieldNumber> 14;15</FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> pos_x_offset=['&F:01']-41;pos_Y_offset=['&F:02']-43;</Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Analyze</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>Cal_Match_Region</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>CameraIndex</Description>
             </i5>
             <i6>
               <Content>200</Content>
               <Description>min_y</Description>
             </i6>
             <i7>
               <Content>255</Content>
               <Description>Max_y</Description>
             </i7>
             <i8>
               <Content>10</Content>
               <Description>Region_w</Description>
             </i8>
             <i9>
               <Content>10</Content>
               <Description>Region_h</Description>
             </i9>
             <i10>
               <Content>50</Content>
               <Description>Pics_sameRow</Description>
             </i10>
           </Parameter> 
         </Item> 
         <Item> 
           <Text> </Text> 
           <Description> Set offset</Description> 
           <ItemType> 2</ItemType> 
           <Skip> 1</Skip> 
           <ItemSection1> DLL</ItemSection1> 
           <ItemSection2> execute</ItemSection2> 
           <ItemCommand> UTS_Video.dll</ItemCommand> 
           <FailAction> </FailAction> 
           <FieldName> </FieldName> 
           <FieldNumber> </FieldNumber> 
           <ErrorCode> </ErrorCode> 
           <RetryTimes> 0</RetryTimes> 
           <RetryDelay> 0</RetryDelay> 
           <Process> </Process> 
           <FieldType> </FieldType> 
           <Parameter> 
             <i1>
               <Content></Content>
               <Description>Min</Description>
             </i1>
             <i2>
               <Content></Content>
               <Description>Max</Description>
             </i2>
             <i3>
               <Content>Analyze</Content>
               <Description>CMD</Description>
             </i3>
             <i4>
               <Content>Set_Offset</Content>
               <Description>SubCommand</Description>
             </i4>
             <i5>
               <Content>0</Content>
               <Description>CameraIndex</Description>
             </i5>
             <i6>
               <Content></Content>
               <Description>Value6</Description>
             </i6>
             <i7>
               <Content>['&VAR:pos_x_offset']</Content>
               <Description>X offset</Description>
             </i7>
             <i8>
               <Content>['&VAR:pos_Y_offset']</Content>
               <Description>Y_offset</Description>
             </i8>
           </Parameter> 
         </Item> 
      </SubItem> 
    </Item>
取自「http://intretech-tw.synology.me/mediawiki/index.php?title=UTS_Video.dll&oldid=493」